Installation of the IMF's fuel management Interface: 1. remove the seat. 2. remove plastic clips that hold the cover in plastic shell gas to the left and right. 3. remove the cover gas and gas tank cover (replacing the gas CAP, as well as the gas tank cap is removed). 4.Motoworks Mount IMF to plastic underneath the seat with Velcro. 5. run wires along the left side of the frame of the sub, as shown in Figure 6. Route the Earth wire and connect to the downside of the battery. 7. locate plug fuel injector. 8. plug in the female connector of fuel injector. 9. connect the original connector which removed fuel injector connector male pigtail short. 10. reinstall the gas CAP cover and plastic seat.
Download Complete 2006 Suzuki LTR450 IMF Fuel Management Interface Installation Manual.
Monday, September 5, 2011
2006 Suzuki LTR450 IMF Fuel Management Interface Installation Manual
