Suzuki JUSTSOMEBODY 450 best installation Manual of the exhaust system

Installation: REMOVING your inventory system: 1. put the machine in a stable job. 2. If you are not familiar with the original exhaust gas removal see the manual before you start working. 3. whenever your machine cool before attempting to remove exhaust gases. 4. remove the two screws in the right-hand pane. Then remove the side panel. 5. loosen the staple stock mid-pipe, and then remove the screw and screw impasse support which supports the silencer. 6. Remove the silencer and stock tube clamp stock header. 7. Slightly loosen the header pipe of the shares on cylinder head to help align the parties. Installing the new XCR system: 1. Installer should use hardware provided. 2. Slide the upper pipe-pipe header. Rotate the lower pipe a bit to get the proper alignment with mounting sub-frame. 3. install the OEM screw through sub-frame on Mount impasse in mid-pipe (finger tight). 4. slide the silencer for mid-pipe, Silent Hill with the align mounting hole and silent install actions and finger tighten screw of M8x25mm provided. 5. Once you have the system fully aligned, install and tighten all screws securely to factory specifications. 6. Replace the side panel and protect the mounting screws. 7. press actions header tube the cylinder head.
Download